Homewyse Calculator: Cost to Install Threshold Transition Strip (2024)

April 2024

Item detailsQtyLow High
Threshold Installation Labor, Basic
Basic labor to install threshold transition strip with favorable site conditions. Plane door bottom for proper clearance. Fit and secure transition strip. Includes planning, equipment and material acquisition, area preparation and protection, setup and cleanup.
1 transition$0.00$0.00
Threshold Installation Job Supplies
Cost of related materials and supplies typically required to install threshold transition strip including: manufacturer recommended underlayment, fasteners, adhesives and surface sealants.
1 transition$0.00$0.00
Threshold Installation Equipment Allowance
Job related costs of specialty equipment used for job quality and efficiency, including: Pneumatic finish nailer, miter saw, circular saw, planer. Daily rental. Consumables extra.
1 transition$0.00$0.00
Unused Minimum Labor
Balance of 2 hr(s) minimum labor charge that can be applied to other tasks.
Totals - Cost To Install Threshold Transition Strip
Average Cost per Transition
Pros Build job winning estimates quickly

Custom Calculators with Homewyse Lists

Service Professionals: create a reusable estimating app that is 100% customized to your business. Start with a template or build your own (free; Account sign up required):

Interior Painting
Exterior Painting
Drywall, Tape and Texture
Residential Electrical
See all Templates

In April 2024 the cost to Install a Threshold Transition Strip starts at $246 - $374 per transition. Use our Cost Calculator for cost estimate examples customized to the location, size and options of your project.

To estimate costs for your project:

1. Set Project Zip Code Enter the Zip Code for the location where labor is hired and materials purchased.

2. Specify Project Size and Options Enter the number of "items" required for the project.

3. Re-calculate Click the "Update" button.

Bookmark or post this page:

Unit Costs = Successful Projects

Homewyse uses the Unit Cost Method for up-to-date example estimates and custom estimates created with Homewyse Lists. The Unit Cost Method promotes clear communication, sets realistic expectations between the customer and service professional - and results in mutual trust, fair pricing and high customer satisfaction.

Cost to Install a Threshold Transition Strip - Notes and General Information

This example estimate is for BASIC work performed in easily serviceable conditions by qualified trade professionals, using popular, IN STOCK products, materials and supplies commonly available at home improvement retailers. Your actual costs will vary due to the unique situation, requirements and choices of your project. Work not mentioned on this page, work with schedule difficulty, and work using master craftsman, premium materials, custom built products and project supervision will result in HIGHER COSTS!

This example estimate is for educational and illustrative purposes - it is NOT a substitute for written quotes from trade professionals. Homewyse strongly recommends that you contact reputable professionals for accurate assessments of work required and costs for your project - before making any decisions or commitments.

The cost estimate includes:

  • Costs for local material / equipment delivery to and service provider transportation to and from the job site.
  • Costs to prepare the worksite for Threshold Installation, including costs to protect existing structure(s), finishes, materials and components.
  • Labor setup time, mobilization time and minimum hourly charges that are commonly included for small Threshold Installation jobs.

The cost estimate does NOT include:

  • Costs for removing, relocating, repairing, or modifying existing framing, surfacing (including molding), HVAC, electrical, and plumbing systems - or bringing any systems into compliance with current building codes.
  • Costs for testing and remediation of hazardous materials (asbestos, lead, etc.).
  • General contractor overhead and markup for organizing and supervising the Threshold Installation. Add 13% to 22% to the total cost above if a general contractor will supervise this project.
  • Sales tax on materials and supplies.
  • Permit or inspection fees (or portion thereof) required by your local building department for your overall project.

References - Threshold Installation

Threshold Installation Budget Management

Homewyse Calculator: Cost to Install Threshold Transition Strip (1)

This infographic highlights decisions and site issues that can cause large cost variances in the typical Threshold Installation budget.

Hiring Local Professionals

Our FREE hiring guide helps you hire wisely, get quality craftsmanship and understand fair pricing for your specific project.

Make Homewyse better

We value your input. So, let us know - did we meet your needs? how can we improve this site? Your comments and sharing are greatly appreciated!

  • Send your feedback or questions.
  • Save and share Homewyse on social media using the buttons below:

Homewyse Calculator: Cost to Install Threshold Transition Strip (2024)


How much does it cost to install transition strips? ›

Pricing can range from less than $1.00 per sq. ft. to over $30.00 per sq. ft., depending on a range of factors. The biggest variable that impacts pricing is the finish of the transition strip.

How much to charge to install a threshold? ›

Most professionals charge between $100 and $300 to replace a door threshold. Interior door thresholds will typically sit toward the lower end of that range, while exterior door thresholds will usually be higher, as your pro will need to waterproof and weatherproof the new threshold.

How much does labor cost to install strapping? ›

How Much Does Installing Strapping On a Ceiling Cost. The final cost, of course, will depend on the size of the project, the materials, and the labor. Although the cost will vary from region to region, most professionals charge between $2.00 - $4.00 per square foot, installed.

How much does labor cost to install quarter round? ›

Unless you plan to DIY your project, professional labor will make up most of your quarter-round installation cost. Carpenters charge $65 to $105 per hour for installation plus an additional $1 to $4 per linear foot for professional painting or staining.

What is the best adhesive for floor transition strip? ›

Apply adhesion to your T-strip

Apply one, long, steady bead of Loctite® PL PREMIUM MAX to both the T-strip and the floor. Loctite® PL PREMIUM MAX works on wood, laminate, drywall, concrete, brick, masonry, stone, marble, metal, stainless steel, fiberglass and more.

How long does it take to replace a threshold? ›

Installing a new threshold and sill will take between two and three hours.

How much should I charge for taping? ›

Taping and mudding: $0.40 to $0.70 per square foot. Sanding and priming: $0.10 to $0.50 per square foot. Finishing: $0.50 to $1.15 per square foot.

How much does labor cost to install furring strips? ›

Labor for install ranges from $0.60 to $2.00 per square foot. If wood furring is used as rainscreen, a pressure treated, or borate treated furring is required. The typical cost for materials is $0.40 to $1.50 per square foot. Drainage mat ranges from $0.60 to $1.70 per square foot.

How much does it cost to install a door knob? ›

You can find different types of doorknobs. Their prices start at $10 to as much as $80. Labor costs for doorknob installation start at $37 to $190. If you're installing a doorknob, you can include locks, deadbolts, and other hardware for $2 to $320.

How do you calculate cost per install? ›

How to calculate Cost Per Install. Cost Per Install is calculated by dividing the ad spend (over a specific time period) by the number of new installs from that same period. For example, if you spent $200 on ads for your mobile app and generated 130 new installs, your Cost Per Install would be $1.53.

How to make a cost estimate? ›

Here are seven steps you can follow to complete a project cost estimate:
  1. Define the purpose of the estimate. ...
  2. Describe characteristics of the project. ...
  3. Develop a plan for the estimate. ...
  4. Determine your approach to the estimate. ...
  5. Manage data collection. ...
  6. Document the estimate. ...
  7. Present the estimate to management.
Feb 3, 2023

How to figure labor cost? ›

The cost of labor per employee is their hourly rate multiplied by the number of hours they'll work in a year. The cost of labor for a salaried employee is their yearly salary divided by the number of hours they'll work in a year.

Do transition strips go under baseboards? ›

If the transitions are being installed with the flooring and before the baseboards, then they will go under the baseboards. If the baseboards are already installed, then it depends on whether or not you want to remove them or undercut them. If not, the transition pieces can butt up against the baseboard.

Do you need transition strips between rooms? ›

Transition strips are a vital tool for your multi-room flooring installation, and you'll need to utilize them often. There are various situations where they're needed, such as: Where your flooring meets a different flooring type. In between rooms where an expansion gap is needed.


Top Articles
Latest Posts
Article information

Author: Nathanial Hackett

Last Updated:

Views: 6188

Rating: 4.1 / 5 (72 voted)

Reviews: 87% of readers found this page helpful

Author information

Name: Nathanial Hackett

Birthday: 1997-10-09

Address: Apt. 935 264 Abshire Canyon, South Nerissachester, NM 01800

Phone: +9752624861224

Job: Forward Technology Assistant

Hobby: Listening to music, Shopping, Vacation, Baton twirling, Flower arranging, Blacksmithing, Do it yourself

Introduction: My name is Nathanial Hackett, I am a lovely, curious, smiling, lively, thoughtful, courageous, lively person who loves writing and wants to share my knowledge and understanding with you.